S-Weld Spatter Guard is a paintable, cost effective and non-flammable agent for the prevention of weld-spatter adhering to metal surfaces during the welding process.
S-Weld Spatter Guard is suitable for a wide range of steels, including mild steel, stainless, steels, aluminium and high performance alloys.
S-Weld Spatter Guard avoids the need for mechanical abrasion or grinding of weld spatter following welding. It contains corrosion inhibitors for base metal protection.
S-Weld increases the life cycle of torch components saving time and money. Eliminates spatter build up which results in poor gas flow causing pitting, porosity.
FEATURES
- Effective for mild steel, stainless steels and high performance alloys
- Non-flammable
- Uniform spray with no air bubbles
- Paintable, contains no silicones
- Provides base metal protection
SPECIFICATIONS
Manufacturer Code | 1450/454 |
---|---|
Appearance | Clear Amber |
Colour | White to Medium Amber |
Odour | Match Standard |
Specific Gravity | 1.29 ± 0.05 g/cc |
Percentage of Volatiles | 92-96% |
Viscosity | 0.4380-0.5350 mm2/sec |
Volume | 16 oz / 454g |
DIRECTIONS FOR USE
Spray S-Weld Spatter Guard before welding in a thin and uniform film onto the areas to be protected. Hold spray can approximately 30cm from the surface to be protected. Also use the spray to protect the interior and exterior of nozzles, the end and outer surface of contact tips, and all other potential areas which are subject to weld spatter. It may be advisable to spray diffusers and the base of the nozzle support as well.
1. Welding Torch
Spray S-Weld Spatter-Guard before welding in a thin and uniform film onto the areas to be protected. Hold spray can approximately 30 cm from the surface to be protected. Also use the spray to protect the interior and exterior of nozzles, the end and outer surface of contact tips, and all other potential areas which are subject to weld spatter. It may be advisable to spray diffusers and the base of the nozzle support as well.
2. Base Metal
Spray S-Weld Spatter-Guard hold spray can approximately 30cm from surface to be protected. Spray a thin uniform coating.
3. Application Methods
Hand held spray applicator for welding torch components and base metal areas. Wiping and mopping may be used for base metal large areas. Air powered and
airless spray systems may also be used.
WHAT'S IN THE BOX
1x CALLINGTON S-WELD Spatter Guard Anti-Spatter Aerosol 16 Oz
Accessories Type | Anti-Spatter |
---|