The MCC Model CM82 Conduit Pipe Threading Machine is an electric motor-driven machine that centers and chucks the steel pipe and rotates Die Head while threading operations are performed. Threading dies are mounted in Die Head. An integral oiling system is provided to flood the work with cutting oil during the threading operations.
The machine is 100% made in Japan.
- Die head rotating in forward direction only
- One touch changeable die head and easy setting dies
- High speed, high efficiency
- Automatic oiling directly to the dies and pipe through the die head during the threading operation
- Die head opens automatically when desired length of thread is cut
- This machine is designed specially to thread conduit pipes
|JIS Conduit Capacity||C15 – C75|
|BSPP Conduit Capacity||PF1/2" – PF3"|
|Motor||Single Phase 50/60Hz Motor with break for quick stop|
|Horsepower||1 HP (750W)|
|2 Rotation Speed||40rpm and 110rpm (60Hz) without load|
|Dimension||460mm(L) x 350mm(W) x 280mm(H)|
• Conduit Dies: C15
• Conduit HSS (SKH) Die: For all conduit die sizes
• Die Head: Bolt Thread Type, Taper Pipe Thread Type
• Pipe Thread Dies: 1/4" ~ 3/8", 1/2" ~ 3/4", 1" ~ 1-1/4"
• Bolt Thread Dies: M8, M10, M12, M14, M16, M18, M20, M22, M24
• Bolt Thread Dies: W5/16", W3/8", W1/2", W5/8", W3/4", W7/8", W1"
6 Months Local Manufacturer Warranty
WHAT'S IN THE BOX
1x CM82 Conduit Pipe Threading Machine
1x Set of CM Die Head A Type C15 – C51, PF1/2" – PF1-1/2"
1x Set of CM Die Head B Type C63 – C75, PF2" – PF3"
1x Set of C19 – C31 Conduit Pipe Dies
1x Set of C39 – C51 Conduit Pipe Dies
1x Set of C63 – C75 Conduit Pipe Dies
1x Set of PF1/2" – PF3/4" Conduit Pipe Dies
1x Set of PF1" – PF1-1/2" Conduit Pipe Dies
1x Set of PF2" – PF3" Conduit Pipe Dies
1x Can of 4 Litre Cutting Oil
1x Chip Scrapper
1x Spanner for die head
1x Hex Key (3, 4, 5, 6, 8mm each)
1x Set of Carbon Brush
1x Machine Cover
1x Tool Box
1x Set of Legs for CM82
|Compatible Material||Steel, Stainless Steel|